ATTENTION STATE OF CALIFORNIA CONSUMERS: *WARNING* Cancer and reproductive harm-www.p65warnings.ca.gov
Vehicle Fitment
Supplied Vehicle Information for ZOND32N
Important Kit Notes
"2-piece rear driveshaft requires carrier bearing drop kit D5505.
Will not fit dually applications
Rear axle diameter will be 3.5"" or 4"", measure before ordering
Minor trimming may be required with some tire/wheel combinations. A front bumper spacer kit (D5801) is available to gain clearance if necessary
If driveline vibration is present, some 6"" kits may require the transfer case indexing kit (D5805). See installation instructions (step 17) for fitment details.
Will work with PowerWagon models with the addition of sway bar link kit D5301. PowerWagon models came factory with a 2"" taller ride height so net lift gain will be 4"" over stock.
Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring"