Home - Return to Previous Page
BDS Suspension 8" 4-Link Lift Kit 2019-2021 RAM 3500 *Diesel* (1728H)
This image is a representation of the product only. Actual product may vary in appearance.
BDS-1728H
Pricing:
$0.00
Prop 65 Notice
ATTENTION STATE OF CALIFORNIA CONSUMERS: *WARNING* Cancer and reproductive harm-www.p65warnings.ca.gov
Vehicle Fitment
Supplied Vehicle Information for BDS1728H
Important Kit Notes
1. Will not work with Mega Cab Models
2. Not compatible with DRW models
3. Will not work with cab and chassis
4. Recoil Traction bars recommended
5. Designed for use on diesel models only
6. Will not fit trucks with rear airbags
7. Does not fit DRW models with 8-bolt transmission (Aisin)
8. This kit requires the use of an aftermarket front driveshaft (not provided) in addition to the (provided) indexing ring kit - BDS122624 (6-bolt) or BDS122421 (8-bolt). Both must be installed, however due to variations between truck configurations we recommend installing the kit prior to taking measurements for the aftermarket front driveshaft to ensure correct length. Vehicle can be driven without front driveshaft. Kit was tested with a Drive Line Plus flange and driveshaft, however other high angle driveshaft options can be used.Tire & Wheel Combinations
40x13.50 w/17x9 and 4.5-5.5" back spacing
40x13.50 w/20x9 and 4.5-5.5" back spacing
*Trimming may be required*
Est. Installation: 8 hours
Difficulty Level (easy 1 - 5 complicated): 4
2. Not compatible with DRW models
3. Will not work with cab and chassis
4. Recoil Traction bars recommended
5. Designed for use on diesel models only
6. Will not fit trucks with rear airbags
7. Does not fit DRW models with 8-bolt transmission (Aisin)
8. This kit requires the use of an aftermarket front driveshaft (not provided) in addition to the (provided) indexing ring kit - BDS122624 (6-bolt) or BDS122421 (8-bolt). Both must be installed, however due to variations between truck configurations we recommend installing the kit prior to taking measurements for the aftermarket front driveshaft to ensure correct length. Vehicle can be driven without front driveshaft. Kit was tested with a Drive Line Plus flange and driveshaft, however other high angle driveshaft options can be used.Tire & Wheel Combinations
40x13.50 w/17x9 and 4.5-5.5" back spacing
40x13.50 w/20x9 and 4.5-5.5" back spacing
*Trimming may be required*
Est. Installation: 8 hours
Difficulty Level (easy 1 - 5 complicated): 4
Details
- BDS-1728H
- BDS-1728H
- BDS
- New
Categories
Shipping Information
- Item Requires Shipping