ATTENTION STATE OF CALIFORNIA CONSUMERS: *WARNING* Cancer and reproductive harm-www.p65warnings.ca.gov
Vehicle Fitment
Supplied Vehicle Information for 1911FSL
Important Kit Notes
1. Works with bar pin lower strut mounts. For eye style lower strut mounts use 2009-13 model kits.
2. Control arms with sensor are designed to keep the sensor arm in the stock position (same position as the OE control arm).
3. Not designed to work with trucks with CCD.
4. Do NOT hit the aluminum knuckle on later model trucks with a hammer to separate the ball joint. Use appropriate ball joint separation tool.
5. For replacement ball joints, use BDS081203. Ball joint is directional and must be installed with the �dot� facing either inward or outward on the vehicle, otherwise damage may occur.
6. Special Service Tool 204-592 recommended to dislodge the ball joint. Tire & Wheel Combinations
35x12.50 w/20x9 and 5.5" back spacing
*Trimming may be required*