Home - Return to Previous Page
BDS 3 Inch Lift Kit w/ Radius Arm FOX 2.5 Performance Elite Coil-Over Conversion Ford F250/F350 Super Duty (20-22) 4WD Diesel (1549FPE)
This image is a representation of the product only. Actual product may vary in appearance.
BDSK-BDS1549FPE
Available
Item sold as a kit. call 800-365-8610 for component availability.
Pricing:
$4,766.25
Prop 65 Notice
ATTENTION STATE OF CALIFORNIA CONSUMERS: *WARNING* Cancer and reproductive harm-www.p65warnings.ca.gov
Vehicle Fitment
Supplied Vehicle Information for 1549FPE
Important Kit Notes
1. Designed for use on diesel models, but can be installed on gas model trucks (will achieve an additional 1/2" front ride height).
2. Larger tires on stock wheels are not recommended due to brake line clearance required. Use recommended specifications listed in tire and wheel fitment section.
3. Installation requires a torque wrench capable of 405 ft-lbs.
4. Due to taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models.
5. Some trucks with a rear driveline vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedure, BDS recommends to have this performed prior to installing the lift.
6. Trucks without top mounted overload springs require (x4) UBT4031 available to purchase separately.
Tire & Wheel Combinations
35x12.50 w/17x9 and 4.5-5" back spacing
35x12.50 w/18x9 and 4.5-5" back spacing
35x12.50 w/20x9 and 4.5-5" back spacing
*Trimming may be required*
Est. Installation: 5 hours
Difficulty Level (easy 1 - 5 complicated): 3
2. Larger tires on stock wheels are not recommended due to brake line clearance required. Use recommended specifications listed in tire and wheel fitment section.
3. Installation requires a torque wrench capable of 405 ft-lbs.
4. Due to taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models.
5. Some trucks with a rear driveline vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedure, BDS recommends to have this performed prior to installing the lift.
6. Trucks without top mounted overload springs require (x4) UBT4031 available to purchase separately.
Tire & Wheel Combinations
35x12.50 w/17x9 and 4.5-5" back spacing
35x12.50 w/18x9 and 4.5-5" back spacing
35x12.50 w/20x9 and 4.5-5" back spacing
*Trimming may be required*
Est. Installation: 5 hours
Difficulty Level (easy 1 - 5 complicated): 3
Details
- BDSK-BDS1549FPE
- BDSK-BDS1549FPE
- BDS
- New
Categories
Shipping Information
- Item Requires Shipping