Home - Return to Previous Page
BDS 6 Inch Lift Kit w/ 4-Link FOX 2.5 Performance Elite Coil-Over Conversion Ford F350 Super Duty DRW (20-22) 4WD Diesel (1574FPE)
This image is a representation of the product only. Actual product may vary in appearance.
BDSK-BDS1574FPE
Available
Item sold as a kit. call 800-365-8610 for component availability.
Pricing:
$5,550.18
Prop 65 Notice
ATTENTION STATE OF CALIFORNIA CONSUMERS: *WARNING* Cancer and reproductive harm-www.p65warnings.ca.gov
Vehicle Fitment
Supplied Vehicle Information for 1574FPE
Important Kit Notes
1. Ford recommends replacement of the pitman arm nut after each time it has been removed
2. Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper
3. If your truck is equipped with a factory rear sway bar add: BDS123808
4. If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402
5. Due to taller factory ride height, Tremor models will not net full advertised lift height
6. Larger tires on stock wheel are not recommended due to brake line clearance required. Use recommended specs listed in wheel and tire fitment section
7. This indexing ring is only compatiblie with 2020 10 speed transmission trucks. Please verify your truck's equipment before installing
8. Indexing Ring has not been designed to work on manual shift transfer case models. Modification to the shift cable mount will be required
Tire & Wheel Combinations
38x13.50 w/20x9 and 4.5" - 5" back spacing
38x13.50 w/17x10 and 5" back spacing
38x13.50 w/20x10 and 5" back spacing
*Trimming may be required*
Est. Installation: 6-8 hours
Difficulty Level (easy 1 - 5 complicated): 4
2. Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper
3. If your truck is equipped with a factory rear sway bar add: BDS123808
4. If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402
5. Due to taller factory ride height, Tremor models will not net full advertised lift height
6. Larger tires on stock wheel are not recommended due to brake line clearance required. Use recommended specs listed in wheel and tire fitment section
7. This indexing ring is only compatiblie with 2020 10 speed transmission trucks. Please verify your truck's equipment before installing
8. Indexing Ring has not been designed to work on manual shift transfer case models. Modification to the shift cable mount will be required
Tire & Wheel Combinations
38x13.50 w/20x9 and 4.5" - 5" back spacing
38x13.50 w/17x10 and 5" back spacing
38x13.50 w/20x10 and 5" back spacing
*Trimming may be required*
Est. Installation: 6-8 hours
Difficulty Level (easy 1 - 5 complicated): 4
Details
- BDSK-BDS1574FPE
- BDSK-BDS1574FPE
- BDS
- New
Categories
Shipping Information
- Item Requires Shipping