Home - Return to Previous Page
BDS 3 Inch Lift Kit w/ Radius Arm FOX 2.5 Coil-Over Conversion - Performance Elite Ford F250/F350 Super Duty (23-24) 4WD (2201FPE)
This image is a representation of the product only. Actual product may vary in appearance.
BDSK-BDS2201FPE
Available
Item sold as a kit. call 800-365-8610 for component availability.
Pricing:
$4,804.47
Prop 65 Notice
ATTENTION STATE OF CALIFORNIA CONSUMERS: *WARNING* Cancer and reproductive harm-www.p65warnings.ca.gov
Vehicle Fitment
Supplied Vehicle Information for 2201FPE
Important Kit Notes
1. This kit is not compatible with trucks equipped with radius arm mounted ride height sensors.
2. Designed for use on diesel models, but can be installed on gas trucks.
3. Will achieve additional 3/4" front ride height.
4. Installation requires a torque wrench capable of 406 ft-lbs.
5. Due to taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models.
6. Larger tires on stock wheel are not recommended due to interference with brake line, radius arm and sway bar. Use recommended specs listed in wheel and tire fitment section.
7. Trucks without top mounted overload spring will require (x4) UBT4031 available to purchase seperately.
Tire & Wheel Combinations
35" x 12.50 w/17 x 9 and 4.5-5" back spacing
35" x 12.50 w/18 x 9 and 4.5-5" back spacing
35" x 12.50 w/20 x 9 and back spacing
*Trimming may be required*
Est. Installation: 4-5 hours
Difficulty Level (easy 1 - 5 complicated): 3
2. Designed for use on diesel models, but can be installed on gas trucks.
3. Will achieve additional 3/4" front ride height.
4. Installation requires a torque wrench capable of 406 ft-lbs.
5. Due to taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models.
6. Larger tires on stock wheel are not recommended due to interference with brake line, radius arm and sway bar. Use recommended specs listed in wheel and tire fitment section.
7. Trucks without top mounted overload spring will require (x4) UBT4031 available to purchase seperately.
Tire & Wheel Combinations
35" x 12.50 w/17 x 9 and 4.5-5" back spacing
35" x 12.50 w/18 x 9 and 4.5-5" back spacing
35" x 12.50 w/20 x 9 and back spacing
*Trimming may be required*
Est. Installation: 4-5 hours
Difficulty Level (easy 1 - 5 complicated): 3
Details
- BDSK-BDS2201FPE
- BDSK-BDS2201FPE
- BDS
- New
Categories
Shipping Information
- Item Requires Shipping